Industrial 4-port Managed Ethernet Poe Switch with 2 Fiber Ports, 48V 

JetNet 4706f  four 10/100TX PoE Ethernet ports and redundant 100FX uplink fiber ports is an ideal model for distant networking such as IP surveillance, wireless access point, etc., where power sources are not readily available. It supports intelligent PoE control and schedule management; each of the four PoE ports can be configured into a weekly schedule on an hourly basis. In addition, PoE on/off can be remote controlled via SNMP and Web.

Design your IP Surveillance Solution with Korenix TODAY!

The Benefits of IP Surveillance with KORENIX

JetNet 4706f is compliant with both IEEE 802.3af PoE as well as the pioneer standard of IEEE802.3at PoE Plus design (enhancement of 802.3af) for boosting PoE delivery up to 30W* through each of the four PoE ports. JetNet 4706f can auto-detect 24V & 48V power input and deliver 24V & 48V** PoE output, allowing for more applications where 48VDC is not an option.

The two uplink ports of JetNet 4706f can be configured as Rapid Super Ring ports, recovering network failure in less than 5ms, or as RSTP ports, integrating with other standard switches. Full network management features such as SNMP v3, QoS, IGMP v3, LACP port trunk are all supported. If the powered device fails to respond after a preconfigured time interval, JetNet 4706f will reboot the powered device and continue to monitor the powered device in every pre-configured time interval. Simply put, the unmanaged powered devices can be managed through JetNet 4706f.

The award winning IP-31 rigid aluminum flat casing and wide operating temperature range both ensure a reliable operation in remote network sites such as public transportation stations or outdoors.

To purchase this product go to our Where to Buy to locate an Authorized Distributor

The Benefits of IP Surveillance with KORENIX

Highlighted on Industrial-Embedded.com 

*Korenix PoE support IEEE802.3af Standard and IEEE802.3at Pre-Standard. Consult with the (PD) Power Device manufacturer before deploying the high power feature.

** Korenix PoE support 48v Standard. Consult with KorenixUSA when deploying 24V feature