The JetNet 5010G is a Managed Industrial Ethernet Switch, equipped with 7 ports 10/100TX and 3 ports 10/100/1000 RJ-45/100-FX/Gigabit SX/LX combo ports. The 2 gigabit ports are used to form the nonstop Rapid Super Ring. The 3rd gigabit port is used to connect to upper switch, to couple ring or public server. The gigabit combo port design gives the flexibility to choose copper or fiber media, 100Base-FX or 1000Base-X, multi-mode or Single-Mode for different distance application,need of without stocking different switch models.
The JetNet 5010G is designed as rugged surface in aluminum material with curvilineal heating dispersing mechanical design and wide operating temperature. The embedded software supports full Layer 2 management features, MSTP, RSTP, multiform ring redundancy, network control, monitor, security and notification. The JetNet 5010G also provides builtin watchdog timer, digital input and relay output to avoid undetected damage. With JetNet 5010G, you can fulfill the dream of having the perfect solution to construct your industrial Ethernet infrastructure.
Comprehensive Redundant Solutions — Multiple Super Ring (MSRTM)
The JetNet 5010G supports MSRTM (Multiple Super Ring); the new generation of RSR (Rapid Super Ring) technology. This new technology includes various new features for different network redundancy applications and structures. The JetNet 5010G allous aggregating up to 5 rings, including 4 Fast Ethernet and 1 Gigabit ring. With the MSRTM technology, a node can be configured to multiple rings with the failover time in as little as 5ms and ZERO-second of restore time. In addition, users can extend the ring topology by adding hundreds of JetNet 5010G to meet the network needs without compromising the speed of the network.
The MSRTM also facilitates the JetNet 5010G to connect with core management switch via standard Rapid Spanning Tree Protocol or through multiple paths or nodes to increase the reliability of the Rapid Dual Homing (RDHTM) Technology. By integrating MSRTM and Link Aggregation Control Protocol (LACP), the JetNet 5010G can enhance the link availability and increase the link capacity. Two or more Fast Ethernet connection are bundled in order to increase the bandwidth and to create resilient and redundant links.
Various Network Control and Security Features
The JetNet 5010G provides various network control and security features. The Network Control feature allows users to optimize their industrial environment. The supported features include VLAN, Private VLAN, QinQ, IGMP Snooping, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Rate Control. The security also helps users to avoid hackers’ attack. The features included are, DHCP Server, IP and MAC Binding, 802.1x Access Control, SSH, IP Access Table and Port Security.
Port Security is an enhanced security feature provided by JetNet 5010G. Port Security is also known as, “Port and MAC Binding”. Users can bind a specific MAC address to a specific port, add the MAC and Port binding entry/entries to the port security table. After enabling this, only the PC with the available MAC address can access the network through the switch. The other PCs can’t even pass the traffic through the port.
Robust Mechanical Design
Korenix JetNet 5010G's outstanding outlook is rock solid with strong functionality. Using aluminum extrusion case with IP 31 class protection, light weight, rigid shell and excellent thermal conductivity units, it can operate reliably under harsh industrial environments.
Link Aggregation Control Protocol
Link Aggregation Control Protocol (LACP) allows you to group multiple Ethernet ports in parallel to increase the link bandwidth. The aggregated ports can be considered as one physical port, so that the bandwidth is higher than just one single Ethernet port. The member ports of the same trunk group can balance the loading and backup with each other. The LACP feature is usually used when you need higher bandwidth for the backbone network. This is an inexpensive way for users to transfer much more data. If the trunk port is also assigned as a ring port, it will become as a TrunkRingTM, which means, that the bandwidth of ring path has increased with port trunk technology. Now, there is no recovery time when failures occur. The JetNet 5010G provides a simple and easy way to aggregate port bandwidth into Rapid Super Ring.
LLDP and JetView Pro i2NMS for Auto Topology Visualization
The Link Layer Discovery Protocol (LLDP) was formally ratified as IEEE 802.1AB-2005. LLDP is the Layer 2 protocol that allows the network device/station to advertise connectivity & management information, the identity & major capabilities. If receives and establishes network management information on the local same network. In industrial environments, most vendors provide their own discovering protocols, window utility or other tools to manage their switches.